This page explains, through an example, how to embed a visualization (table or chart) or pinboard from ThoughtSpot in your own static Web page, portal, or application.
Get the link for an entire pinboard or single visualization
This procedure assumes the pinboard with the visualization you want to embed already exists. If the pinboard or visualization doesn’t exist, create it now before continuing.
Log in to ThoughtSpot from a browser.
Navigate to a visualization on the Pinboard tab.
Open a pinboard.
Copy the URL for the entire pinboard and for a single visualization.
If the object is a pinboard, click the ellipses icon > Copy Link.
The format for the link is:
For a vizualization in a pinboard, click the ellipses icon > Copy Link.
The format for the link is:
Edit the test.html
You need to edit the page in your application or web page where you want to
embed a ThoughtSpot pinboard or visualization. For this example, you’ll get a copy of the
- Create an empty directory called
- Save the
test.htmlfile to the
apidirectory co-located with the
- Edit the
test.htmlfile in your favorite editor.
Scroll down to the
Variablessection (about line 37).
Here are the fields in the
test.htmlfile you need to edit.
var protocol = "THOUGHTSPOT_PROTOCOL"; var hostPort = "HOST_PORT"; var pinboardId = "PINBOARD_ID"; var vizualizationId = "VIZUALIZATON_ID";
Edit each variable in the section and replace it with the IDs you copied from the pinboard.
For example, your URL may look similar to the following:
This is a link copied from an individual visualization, the result in the file is:
var protocol = "http"; var hostPort = "172.18.202.35:8088"; var pinboardId = "061457a2-27bc-43a9-9754-0cd873691bf0"; var vizualizationId = "9985fccf-b28d-4262-b54b-29619a38348e";
The protocol (
https) of your client and your ThoughtSpot instance should match. You’ll use this identifier in the next part.
- Save your changes and close the
Enable CORS for your client domain
You must work with ThoughtSpot support to enable CORS between your client
application domain and the ThoughtSpot domain. If you don’t do this, you will
receive an error message when
test.html attempts to load the embedded objects.
The test infrastructure uses Python’s
simplehttpserver which runs, by default
localhost:8000, this is information ThoughtSpot support will need. You can
also just copy the
test directory to an existing web server. If you do this,
you’ll need to DNS for the server when you contact Support.
Test the example page
You are almost ready to view your embedded pinboard and visualization. The
fastest way to run a webserver and test the code is using Python’s
simplehttpserver. If you have Python on your system you already have the
Log into ThoughtSpot.
In production, you would have added authentication code to your client. You haven’t done that with this system. So, before you test, you’ll login to the ThoughtSpot. Successfully logging in causes the system to create a session and an authentication key. Your browser has this information and so when you load the
test.htmlpage in another tab, you won’t need to authenticate again.
- Change to your
python -m SimpleHTTPServer 8000
Open your browser’s Developer tools.
Navigate to the test page in your browser.
You should see something similar to the following:
Check the browser console.
Success is appears in the console with a message similar to this:
test.html:60 Initialization successful. test.html:113 http://172.18.202.35:8088/#/embed/viz/061457a2-27bc-43a9-9754-0cd873691bf0 test.html:129 http://172.18.202.35:8088/#/embed/viz/061457a2-27bc-43a9-9754-0cd873691bf0/9985fccf-b28d-4262-b54b-29619a38348e
If your embeds don’t load, open the developer tools on your browser. Look for errors in the page loading, usually on the Console tab. If you see an error similar to:
No 'Access-Control-Allow-Origin' header is present on the requested resource.
Typically you see this if the cross domain (CORS) setting was not completed correctly on your ThoughtSpot cluster. Contact [email protected] for more help.